Nintendo 64 and Gamecube controllers are excellent controllers which are quite appropriate
for many PC games. With this circuit, you can easily modify a controller or build a cable which can connect a
Gamecube or Nintendo 64 controller to a PC equipped with an USB port.
Standard Gamecube controllers (Official and 3rd party)
Wireless Gamecube controllers (Known to work with Nintendo's Wavebird and an Intec controller)
N64 Controllers (Official, and most 3rd party, including the Hori Mini)
Should support all accessories acting as a standard N64 or GC controller.
Vibration function/rumble supported! Tested with project64 and dolphin.
Gamecube keybord support. Tested with ASCII ASC-1901P0.
N64 Memory cards
Simultaneous use of a N64 controller and Gamecube controller on the same adapter.
The firmware auto-detects which type of controller (Gc or N64) is connected. On the PC side,
no custom drivers are needed. It works fine with Windows (2K/XP/Win7/Win8 32&64 bit), Linux and MacOS X.
It should also work with other operating systems supporting USB and HID joysticks. Vibration only
tested on Windows with project64 and dolphin.
gc_n64_usb: Pre-assembled and pre-programmed (v2.9). Just solder your USB and gamepad wires.
Note: Prices are in canadian dollars (CAD) and may change without prior notice. If necessary, currency conversion will be done automatically by PayPal.
*: Orders are normally prepared and shipped within 7 business days. The transit
time varies according to the country of destination, but between 4 and 10 business days are typical. Business
days are Monday to Friday, with the exception of holidays (Canadian or in the destination country).
This is an open source project. So if you'd like to build it yourself, all the information you need is on my
Gamecube/N64 to USB
No PayPal account required!
(C) Copyright 2006-2014, Raphaël Assénat
Gamecube, Wii and Nintendo 64 are registered trademarks of Nintendo. All other trademarks are the propriety of their respective owner(s). I am in no way affiliated with Nintendo.