N64/Gamecube to USB adapter with vibration/rumble support

N64/Gamecube controller to USB adapter

  •  The adapter
  •  The adapter
  •  Supports Hori N64 controllers
  • 	Supports Japanese white GC controller


Nintendo 64 and Gamecube controllers are excellent controllers which are quite appropriate for many PC games. With this adapter, it's possible to use a N64 or Gamecube controller on a PC equipped with an USB port. For multiplayer games, many adapters can be used at the same time.

Discontinued product. Replaced by an improved version: Gamecube/N64 to USB adapter - V3
Supported controllers:
  • Standard Gamecube controllers (Official and 3rd party)
  • Wireless Gamecube controllers (Tested with Nintendo's Wavebird and an Intec controller)
  • Gamecube Dance mats (Opposite directions supported)
  • N64 Controllers (Official and most 3rd party, inclding the Hori Mini)
  • Should support all accessories acting as a standard N64 or GC controller. (eg: DK Bongos)
  • Vibration function/rumble supported! Tested with project64 and dolphin. (since adapter firmware 2.1)
  • Supports the Gamecube keyboard. Tested with ASCII ASC-1901P0 (Since firmware version 2.9)
Not supported:
  • N64 Memory cards
  • Simultaneous use of a N64 controller and Gamecube controller on the same adapter.
System requirements:
The firmware auto-detects which type of controller (Gc or N64) is connected. On the PC side, no custom drivers are needed. It works fine with Windows (2K/XP/Win7/Win8 32&64 bit), Linux and MacOS X. It should also work with other operating systems supporting USB and HID joysticks (and HID keyboards to use the Gamecube keyboard). Vibration only tested on Windows with project64 and dolphin. Both parts of the gamecube keyboard are supported, but only one at a time. Two adapters are needed to use the joystick and keyboard simultaneously.

Those adapters are built using our own Gamecube/N64 Controller to USB adapter circuit. Adapter color and cable length are subject to change.


This product is discontinued

It has been replaced by: N64/Gamecube to USB adapter - V3

Download(s) & Link(s)

Manual (Work in progress)http://www.raphnet.net/electronique/gc_n64_usb_manual/index_en.php
Gamecube L/R sliders calibration fixer.
Calibrate normally, then run this tool.

Related products

Product photo

The latest version of our GC/N64 controller to USB adapter.