RSS

News

New: PC-FX to USB conversion circuit
2021-09-17
This circuit makes it possible to use a PC-FX controller on a computer with an USB port, by installing it inside a controller or building an adapter.

See also our Virtual Boy to USB circuit


Adapter manager: Version 2.1.25 now available
2021-09-02
  • Support for inverting X/Y joystick axis (for firmwares supporting it)
  • Classic to GC/Wii firmware version 1.6 : New button mapping added
  • SNES to GC/Wii firmware version 2.4 : Fix a centering/drift issue in games where the dead zone is very small
  • SNES to N64 firmware version 1.6 : Added a new mapping (mode 4)


Adapter manager: Version 2.1.24 now available
2021-08-05
  • Classic to GC/Wii firmware version 1.5 : Fix a centering/drift issue in games where the dead zone is very small.
  • N64 to GC/Wii firmware version 2.4 : Fix a centering/drift issue in games where the dead zone is very small.
  • Improvoved N64 transfer pak performance by automatically disabling controller polling during operations.
  • Firmware update for the Saturn to USB v2 adapter (HSS-07 fix)
  • Support for AnodeSNES v2
  • Support for future adapters. (PCFX, Intellivision and Virtual Boy)


SD-Cart JR now available with a boot ROM
2021-03-19
This cartridge PCB lets you use MMC/SD cards as a removable storage medium for your PCjr, and with the optional boot ROM, it can even replace a hard drive!

The boot ROM is pre-programmed and installed in a socket (a quality one with machined pins) so it can be upgraded.

If you already own an SD-Cart JR and would like to add a boot ROM (or upgrade), we also sell pre-programmed EPROMS.


Adapter manager: Version 2.1.23 now available
2021-03-10
Mostly new firmwares:
  • Classic to USB v2.2.4: External button support (RJ11 connector on Wii Guitars)
  • GC/N64 to USB v3.6.1: Brawler 64 wireless compatibility fix.
  • Classic to N64 v2.1.0: Compatiblity fix for Wired Fight Pads. (value overflow)
  • Gamecube to N64 v2.3: Option to invert Main/C-Stick axis (i.e. Inverted up/down), C-Stick auto-centering (Fixes drifting), The Controller Pak (Memory card) can now be disabled.
  • Dreamcast to USB v2.0.1: Fix analog triggers sensitivity (Would return a negative value when fully pressed).

See release notes for more details and the complete list of changes.


2020-2121 End of year schedule and Covid effects (Updated)
2021-01-11
For orders shipping from Canada: Due to the COVID-19 situation in Quebec, Canada, there will be no shipping after December 23, 2020 until January 11, 2021. Update: We are not accepting new orders until February 8 (or later, if the government postpones the date). Orders already placed however will be shipped in the week of January 11 as planned.

For orders shipping from Japan: Shipped within 5 days, excluding week-ends and holidays. (Business as usual)


Update: Operations have fully resumed on February 8, 2021. New orders are now accepted and processed normally.


Dreamcast controller to USB adapter (v2)
2020-10-17
With this adapter, you can use a Dreamcast controller, arcade stick, racing controller, keyboard or mouse on a PC with an USB port.

New lower latency version.


Super Sudoku (SFC/SNES game cartridge)
2020-09-28
This is a Sudoku game for SNES, with 400 built-in puzzles, hint engine and auto-solver. Also one of the rare games to support the NTT Data Keypad. Cartridges for SNES systems worldwide (PAL and NTSC) are available.


New: Classic controller to N64 - V2
2020-09-18
The Classic controller to N64 adapter is now available again, but in a new form factor and with an improved firmare. With its built-in controller pak and highly customizable mappings, this adapter is a great alternative to worn-down N64 controllers.


In stock: 64 kB Expansion RAM cartridge board
2020-08-25
This is a 64 kB memory expansion board, for upgrading an MSX 1 computer with less than 64 kB of RAM to 64 kB.

Perfect for systems such as the Sony HB-10 which come with only 16 kB of built-in RAM, where many games cannot be loaded through the cassette port without more memory.


About our many out-of-stock products
2020-08-20
Many of our products are out of stock right now, but this is only temporary!

We try to adapt as well as we can to the challenges the current worldwide situation poses and so do the many suppliers we rely on, but unfortunately we ran out of circuit boards for almost all our USB products and our supplier is running behind schedule. For some products the cables we need are still somewhere in shipping, which happens to be slower than before and somewhat unpredictable...

We are sorry for the inconveinence and are doing all we can to resolve the situation.


The Classic controller to Gamecube adapter is back!
2020-07-28
It took more time than we had planned, but at last it's ready! Our Classic controller to Gamecube is back!

This adapter makes it possible to use a Classic controller (pro) or SNES/NES Classic edition controller on a Wii or Gamecube. With it's low latency and 6 built-in button mappings, this adapter is ideal for the Game Boy player, Gamecube games and virtual console games.


Delivery delays due to the postal service
2020-06-28
It has become quite clear that the postal services are significantly slowed down by COVID-19. Unfortunately there is nothing we can do about that. If possible, please wait at least 1 month before worrying and contacting us. Thanks in advance for your patience and understanding.


Classic controller to SNES adapter available again!
2020-06-11
The Classic controller to SNES adapter is now available again, and in a new form factor! Programmed with firmware 2.0.0 which includes fixes for 8BitDo receiver issues, this adapter is the perfect solution for using new, high quality controllers, wired or wireless, on your good old SNES!


We are now open!
2020-05-11
We are finally reopening after being closed for weeks in compliance with directives from our government. We have been accepting pre-orders since May 4, and we have a huge backlog. While we will do our best, it will take some time before we are able to ship as quickly as we used to. When placing a new order, please accept that there can be delays. The current estimate is that it may take 1 or 2 weeks before new orders ship.June 3 update!: Things are back to normal now!


Adapter manager: Version 2.1.21 now available
2020-05-07
  • Add Classic controller/Wiitar to USB adapter firmware version 2.2.2:
    • Add support for Taiko drums
    • Enable high resolution (8 bit instead of 6) classic controller reading. (more info on this here)
    • SN30 receivers left ghost input fixed thanks to the above.
    • 2-player adapters now usable in 2-player mode again.
  • Add Neo Geo to USB adapter support


We are now temporarily closed but accept pre-orders
2020-03-23
The local government (Quebec, Canada) has ordered all non-essential businesses temporarily closed due to the coronavirus outbreak. Accordingly, the raphnet-tech online store is closed until May 11 May 4 April 13 or further notice.

You may however order right now to get your order shipped a bit earlier (but after May 11) as we will process them in the order they are placed. But please understand that there could be unexpected delays, as it will probably take us a few weeks to recover and ship at our usual pace. We apologize for the inconvenience.

As always, please stay safe and in good health!


Adapter manager: Version 2.1.20 now available
2019-10-28
  • Add Classic controller/Wiitar to USB adapter firmware version 2.2.0:
    • Add support for Wii Turntables
    • Add support for Drawsome tablets (mouse mode only)
    • Faster communication (slightly improved performance in 1ms mode)
  • Add a mode for 2 player adapters running in single-player mode
  • Prepare for GC/N64 to USB adapter firmware 3.7


Finally in stock: Classic controller / Wii Guitar to USB adapter V3
2019-10-17
At last, the missing USB cables are here and we have begun shipping pre-ordered adapters. New orders will be processed within the normal delay of maximum 5 business days. Thank you for your patience!


Famicom controller to USB adapter, updated and back in stock!
2019-09-20
This new version of the adapter, now with lower latency and updateable firmware, also adds supports the HVC-007 Famicom keyboard.


New version coming soon: Classic controller / Wii Guitar to USB adapter V3
2019-09-13
Check out Version 3 which will be released in early October. This new incarnation has equal performance, is more compact and we've doubled the length of the USB cable.


Adapter manager: Version 2.1.19 now available
2019-08-30
  • New N64 to GC/Wii firmware v2.2: Fix the L+R mapping.
  • New Classic controller to GC/Wii firmware v1.3: Special mappings for playing Mario Kart on the switch with a Nunchuk or a NES classic controller.
  • Add support for a Famicom to USB adapter (controller and keyboard modes).


Adapter manager: Version 2.1.18 now available
2019-07-19
This version contains a new firmware for Classic controller to USB adapters (version 2.1.2):
  • Calibrate whammy bar on guitars
  • Add support for Wii drums
  • Remap Guitar buttons in a more logical order (sequential) and matching drum colors
  • Add support for the uDraw tablet (joystick emulation and mouse)


PC Gameport (DB15) joystick to USB adapter released
2019-06-14
Connecting a good old analog Game port joystick to a modern computer with this adapter is easy! Perfect for playing classic DOS games with DOSBox!


N64 ROM for updating our 'to N64' adapters
2019-02-07
Originally created for updating the firmware of our Gamecube to N64 adapter, the N64 adapter manager now also supports our SNES and Classic controller to N64 adapters.


New: Classic controller to N64 adapter
2019-01-18
This adapter allows you to connect a Classic controller to a N64. The firmware has programmable button mappings, is updateable and has a low latency for reliable and responsive gameplay.


Classic controller to SNES adapter updated
2018-12-18
Our Classic controller to SNES adapter now ships with firmware 1.0.2, which adds support for the 8BitDo wireless controllers such as the SN30. Also, the Classic controller side of the cable is now black.


3DO Controller to USB adapter: New version with lower latency
2018-11-22
Use 3DO Controllers on your PC with this new and improved adapter built using advXarch technology to provide a very short response time as well as the possibility to configure and upgrade the adapter firmware.


Adapter manager: Version 2.1.16 now available
2018-11-06
This version contains a new firmware for Gamecube to USB adapters (and the two-player version too) which adds Gamecube Keyboard support.

With a two-player adapter (or a pair of single player adapters) one can now fully use Gamecube keyboards!


raphnetraw plugin version 1.0.6 released
2018-11-06
New releases of the raphnetraw direct controller access plugins for PJ64 and mupen64-plus are available.

Maintenance:
  • Support for N64 to USB adapters running firmware version 3.6.x


Adapter manager: Version 2.1.14 now available
2018-08-30
This version contains new firmwares for 3 products:



N64 to Gamecube/Wii adapter V2
2018-10-01
A new version of our N64 to Gamecube/Wii adapter is now available:
  • Compatible with the Nintendo Switch (through a Gamecube adapter for Wii U)
  • Compatible with the Gameboy player
  • The adapter now recalls the last used mapping automatically (no need reselect before each use)
  • Updateable firmware


Adapter manager: Version 2.1.11 now available
2018-08-30
This new version contains an updated firmware for our SNES controller to Gamecube/Wii adapter to fix compatibility with the Switch!
  • New firmware for the SNES to GC/Wii adapter: Switch + Wii U gamecube adapter compatibility fix
  • New firmware for the SNES to USB adapter: Add basic mouse support to 2-player adapter
  • Support for enabling mouse mode on 2-player SNES to USB adapter
Note: To install the new firmware, you will need to connect the SNES to GC/Wii adapter to your computer through a raphnet-tech Gamecube to USB adapter.


Adapter manager: Version 2.1.10 now available
2018-08-29
  • New firmware for the Megadrive to USB adapter: Now supports the Sega Megamouse
  • New firmware for Saturn to USB adapter: Adds the 3 mappings (SLS, SLS-Alt and VIP) from version 2. (Great for PS3 use)
  • Support for Saturn to USB button mapping selecting (choice stored in the adapter)


Adapter Finder: Quicky find what you need
2018-08-20
Our list of product has grown a lot in recent years, and as a result spotting what you need is not so easy anymore. But with our new Adapter Finder, it just got easier and quicker than ever!

Simply select your controller type and the system you would like to use it on to instantly get a list of matching products.


Adapter manager: Version 2.1.9 now available
2018-08-14
Update your SNES controller to USB adapter with the 2.2.0 firmware bundled in this release to gain support for the SNES mouse!

Support for japanese in the controller pak editor has also been fixed.


Finally back! Sega Saturn controller to USB adapter
2018-08-09
Our Sega Saturn controller to USB adapters are available again, in a completely redesigned version with an updateable firmware and very low latency.

Supports standard control pads, the 3D control pad and even the Shuttlemouse!


Megadrive/SMS/Atari controller to USB adapter: New version with lower latency
2018-07-26
Use Megadrive, SMS or Atari-style controllers and joystick on your PC with this new and improved adapter built using advXarch technology to provide a very short response time (as low as 2ms!) as well as the possibility to configure and upgrade the adapter firmware.

While inventory lasts: 20% off the old version.


New: PS1/PS2 controller to USB adapter
2018-06-22
Introducing an USB adapter for Playstation 1 and 2 controllers, with low latency, multitap and memory card support.

This adapter lets you use PS1 and PS2 controllers on your PC. The multitap is also supported, enabling simultaneous use of up to 3 controllers. Memory cards connected to a multitap can also be read and written to, making it possible to backup, share or transfer your saves to emulators.


Adapter manager: Version 2.1.6 now available
2018-06-21
This new version of the adapter manager includes new firmwares for the following products:
  • Classic controller to GC/Wii adapter (Fix compatibility with some 3rd party controllers)
  • SNES controller to GC/Wii adapter (GBI compatibility fix)
It also adds support for a few upcoming adapters such as PSX to USB and a introduces new command-line options for advanced use, testing and research. See changelog for details.


raphnetraw plugin version 1.0.5 released
2018-05-16
A new release of the raphnetraw direct controller access plugin for PJ64 is available.

Bugfix/maintenance:
  • Add protection against invalid commands (Fixes errors when using more than one controller pak)
  • Disabled logging (slight increase in performance)


New: TurboGrafx-16 controller to PCEngine adapter
2018-04-08
With this adapter, TurboGrafx-16 controllers can be connected to a PCEngine console, or used with our PCEngine controller to USB adapter.


PSX controller to Sega Saturn adapter: Now with 6 built-in mappings
2018-04-07
Our Playstation controller (or arcade stick) to Sega Saturn adapter now ships with two new mappings, for a total of 6 built-in mappings.


Follow us on Twitter (@raphnet_tech)
2018-04-25
We will now also write on Twitter about new products, updates and about ongoing projects. Follow us to receive the latest news!

Not on twitter? We also have an RSS feed and a Facebook page.


New: PC Engine controller to USB adapter
2018-04-24
We now have a ready-to-use USB adapter for PCEngine controllers and multitaps, for up to 5 players. Built using advXarch technology for low-latency and supported by our adapter manager for update and configuration. Available in black and in grey.


NES controller to USB adapters : Lower latency
2018-03-15
This redesigned version of our NES to USB adapter leverages advXarch technology (also used by our N64/Gamecube to USB adapters) for a latency as low as 2ms, an updateable firmware and configurable features. Available in 1 or 2 player versions.


Improved SNES to Gamecube/Wii adapter
2018-01-21
Now shipping with firmware 2.0, which includes many improvements:
  • New and updated button mappings for a better Game Boy Player experience
  • New button mapping for Megaman collection
  • The adapter now recalls the last used mapping automatically (no need reselect before each use)
  • Updateable firmware


Classic controller to Gamecube/Wii adapter
2018-01-16
This adapter makes it possible to use a Classic controller (pro) or SNES/NES Classic edition controller on a Wii or Gamecube. Ideal for the Game Boy player, Gamecube games and virtual console games. Comes with six (6) built-in button mappings and firmware update capability.


New year specials on our 2-player adapters!
2017-12-27
25% OFF sale on our 2-player adapters for NES, SNES, N64, Gamecube and Classic controllers. This offer starts today and ends on 2018-01-07.


Classic controller to SNES adapter
2017-12-16
With this adapter, you can use a Classic controller (or compatible) on an original SNES system. The long SNES cable also acts as an extension, perfect for using NES/SNES Classic edition controllers that are known for their short cables.


Adapter manager: Version 2.1.4 now available
2017-12-03
This new version of our adapter manager includes new GC/N64 to USB and SNES to USB adapter firmwares and various bug fixes and improvements. See the download page for more details.


New: Gamecube controller to N64 adapter with built-in Controller Pak
2017-11-30
On top of the highly configurable button mappings and features offered by its predecessors, this new version (V3) of our popular Gamecube controller to N64 adapter adds a built-in Controller Pak, making it a perfect fit for games where this is the only way progress can be saved.

While supplies last: Save 3$ on the previous version (V2)


One-week specials on our two-player USB adapters!
2017-11-23
Starting on Black Friday (2017-11-24), through the week-end and until next Friday, our 2-player adapters for NES, SNES, N64, Gamecube and Classic controllers are only 29.99$ (regular price: 34.49$).


raphnetraw plugin version 1.0.4 released
2017-11-22
New releases of the raphnetraw direct controller access plugins are available. (PJ64 plugin version 1.0.4 and mupen64plus plugin version 1.0.1).

Changes:
  • Add support for the upcoming 3.5.x adapter firmware (2-player adapters won't work properly otherwise)
Start using them now and be ready for the next firmware update!


Classic controller to USB adapters (new version)
2017-11-02
New version of our Wiimote accessory to USB adapter, now for the first time also available for two players. Supports Classic controllers, NES/SNES Classic edition controllers as well as the Nunchuk. Uses our advXarch technology for minimal latency and advanced configuration options.


SNES controller to USB adapters : Faster than ever
2017-10-23
This redesigned version of our SNES to USB adapter leverages advXarch technology (also used by our N64/Gamecube to USB adapters) for a latency as low as 2ms, an updateable firmware and configurable features. Available in 1 or 2 player versions.

While inventory lasts: 25% off the old version.


NES and SNES classic edition controller support
2017-10-10
We confirm that our Wiimote accessory to USB adapter already supports the controllers supplied with the NES and SNES classic editions. A great way to use quality, newly manufactured controllers on your PC!


raphnet-tech adapter manager v2.0.0
2017-10-03
This is an evolution of our GC/N64 to USB adapter manager to support all our adapters. Adapters with advXarch technology, currently only used in our N64/GC to USB adapter series, can be configured and updated using this new version. Otherwise, simply displays the name and version of any raphnet adapter (even very old and rare ones).


Also available in black: Gamecube to N64 adapter
2017-08-05
Our popular Gamecube controller to N64 adapter, formerly only available in red, is now also available in black. Select the color that goes best with your console, cables and controllers!


New: 3DO controller to USB adapter
2017-01-01
This adapter lets you use up to two 3DO controllers to play games on your computer.


SNES/N64/Gamecube to Wiimote adapter
2016-12-16
This new adapter supports three generations of Nintendo controllers for the most authentic virtual console or emulator experience. A perfect complement to the recently released NES Controller by Nintendo.


Back in stock: Sega Saturn controller to USB adapter
2016-12-08
After a longer than planned period, our Sega Saturn controller to USB adapters are back in stock.


New product: SNES controller to N64 adapter
2016-11-26
This new product has been designed to provide better controls when using the Neon64 NES emulator and with the Wide-Boy 64.


Direct N64 controller access plugins for mupen64plus and Project 64 (Experimental)
2016-11-22
These plugins use the direct controller access feature offered by our N64 to USB adapters (3rd generation) to let the emulated game communicate with the controllers directly. As as result, the joystick is perfectly accurate and the rumble pak, controller pak (mempak) and potentially other accessories are automatically supported! (Updated: Now for Project 64 too!)


Direct N64 controller access plugin for mupen64plus (Experimental)
2016-11-20
This plugin uses the direct controller access feature offered by our N64 to USB adapters (3rd generation) to let the emulated game communicate with the controllers directly. As as result, the joystick is perfectly accurate and the rumble pak, controller pak (mempak) and potentially other accessories are automatically supported!


Dual Gamecube controller to USB adapter
2016-10-30
Two-player adapters for Gamecube controllers are now available, and they are as good as their single-player counterparts: Very low latency, vibration support and updatable firmware. Available in two colors (Black and Violet).


Dual N64 controller to USB adapter
2016-10-25
Two-player adapters for N64 controllers are now available, and they are as good as their single-player counterparts.

Note: We also have dual-gamecube adapters coming soon! in stock!


Official release: 3rd generation N64/Gamecube to USB adapter
2016-08-19
After many months, version 3 of our N64/Gamecube to USB adapter is finally available in its final form. Version 3 has a lot to offer, including an upgradeable firmware, N64 memory pack support and ultra low latency. Available in black and violet.


Back in stock: Gamecube controller to N64 adapter
2016-08-19
Our popular Gamecube controller to N64 is now back in stock!


New: Vectrex controller to USB adapter
2016-07-25
This adapter lets you use an original Vectrex controller to play games on your computer. Perfect for emulators!


Canada Post potential shutdown
2016-06-25
Due to a labour dispute, Canada Post service may be suspended as early as July 2. We will make sure all orders placed before June 27, 12:00 EDT are shipped the same day and therefore delivered (Canada) or transfered to the foreing (US and International) mail agency in time.

We will keep accepting orders at all times during the disruption and will ship them as soon as the conflict is solved, on a first in first out basis. (So order now to have your order out first!). As always, if you change your mind, you will have to option to get a refund for your unshipped orders.

Thank you for your support and collaboration!


A good match: Raphnet-tech USB controller adapters and RetroPie
2016-05-03
The RetroPie project is a great alternative to using a full PC for your retro-gaming and emulation needs. The low cost, low power consumption and small form factor of the Raspberry Pi make it a perfect fit for the living room, just as your beloved consoles.


NES/SNES/N64/Gamecube to Wiimote adapter
2016-04-17
This new adapter supports four generations of Nintendo controllers for the most authentic virtual console or emulator experience. Save 50% by buying this one adapter instead of four!


Pre-release version of our 3rd generation N64/Gamecube to USB adapter now back in stock
2016-04-03
We built a new batch! Those who missed the first batch now have a second chance to become an early adopter of this new version and benefit of huge improvements over the previous iterations, on the feature front as well as the performance front. See product page for details.


New 3rd generation GC/N64 to USB adapter firmware available
2016-02-29
Firmware version 3.1.1 has been released. Corrects a vibration issue with x360ce where the controller would start to rumble and never stop. Update your adapters now!


Raphnet-tech is now on Facebook
2016-02-28
Stay informed about new products, updates and some of our ongoing projects by liking us on Facebook to hear from us directly in your news feed.


Pre-release version of our 3rd generation N64/Gamecube to USB adapter available
2016-02-17
Become an early adopter of this new version and benefit of huge improvements over the previous iterations, on the feature front as well as the performance front:
  • Very low latency (approx. 6ms worst case)
  • Configurable controller poll frequency (Maximum 500Hz)
  • Calibration not normally required
  • Firmware update possible and easy
  • N64 mempak read/write


New year specials on our GC and N64 to USB adapters!
2015-12-27
Starting today (2015-12-27) and through January, our N64, Gamecube and N64/Gamecube to USB adapters are on sale! 30% off the regular price.


Black friday specials on our GC and N64 to USB adapters!
2015-11-27
Starting this Friday (2015-11-27), through the week-end and until Monday night, our N64, Gamecube and N64/Gamecube to USB adapters are on sale! 30% off the regular price.


Gamecube controller to N64 adapter, new version!
2015-10-14
After being out of stock for a few months, our Gamecube to N64 adapter is back and improved. New in version 2:
  • Upgradeable firmware
  • Now built in a translucent plastic enclosure.
  • Buzzer replaced by a bright LED.
  • Improved Gamecube to N64 stick translation.
  • Improved reliability.


New: Playstation controller to Sega Saturn adapter
2015-10-02
If your favorite controller (eg: An arcade stick) connects to a Playstation but you would like to use it on your Sega Saturn, this adapter is exactly what you need.


New product: Megadrive/SMS controller to Wiimote adapter
2015-07-06
With this adapter, you can use a Genesis or SMS controller as a classic controller. Ideal for Wii virtual console games!


NES adapters finally back in stock!
2015-06-28
After many months, all our NES controller adapters are finally back in stock. Order our NES controller to Gamecube, Wiimote and USB adapters now!


Now available: Jaguar controller to USB adapter
2015-03-05
In answer to a significant number of requests, we designed and are now offering this ready to use Atari Jaguar controller to USB adapter.


Sega Master System to MarkIII/SMS-J cartridge adapter
2015-02-20
If you own a Sega MarkIII or a Japanese Master System, this adapter enlarges your game library by letting you use non-japanese 50 pin cartridges. Ideal for games without a Japanese version, games you already own, or games difficult/expensive to get from Japan. Also, many titles originating in Japan still support FM sound, so if you have a MarkIII FM sound unit or a Japanese SMS, some games will sound better.


N64/Gamecube to Wiimote adapter
2015-02-17
For those of you who switch between Gamecube and N64 controllers depending on the game, we now have an adapter supporting those two controllers! Save 30% by buying one adapter instead of two!


New: MarkIII to Megadrive/Genesis cartridge adapter circuit
2014-10-31
You want to play Sega MarkIII/Japanese Master System games but you only have a Genesis/Megadrive console? No problem, the system is backward compatible with SMS games. All you need is a cartridge adapter. Available fully assembled or in kit.


Introducing AnodeSNES, a quality quad SNES controller to USB adapter
2014-09-05
Built in a beautiful metal enclosure, custom machined from a solid block of aluminium and anodized black.


New: SMS to Megadrive/Genesis cartridge adapter circuit
2014-08-22
You want to play Sega Master System games but you only have a Genesis/Megadrive console? No problem, the system is backward compatible with SMS games. All you need is a cartridge adapter. Available fully assembled or in kit.


PS1/PS2 controller connectors now available
2014-08-09
Now available: PS1/PS2 controller connectors for mounting on a PCB. Perfect for adapter projects and console mods.


New: Famicom controller to USB adapter
2014-06-23
With this adapter, you can use controllers meant for the Japanese Famicom on your PC.


New: Sega saturn controller extension cable
2014-05-08
Extend the length of your Sega saturn controllers with this extension cable.


Back in stock: Sega saturn controller to USB adapter
2014-05-08
After being unavailable for a few weeks, the Sega saturn controller to USB adapter is finally back in stock.


New: 3 Channel video buffer
2014-04-13
A triple video buffer circuit, useful for console modding. Eg: Addition of outputs such as composite, S-Video, RGB etc.


SNES controller to Atari/Commodore adapter
2014-02-06
This new adapter lets SNES controller be used on Atari and Commodore computers. Perfect if you have arcade controllers for SNES only or simply prefer SNES controllers.


SNES controller to Megadrive adapter
2013-12-15
If you want to play games on your Genesis/Megadrive console but have a strong preference for SNES controllers or own many cool snes-only arcade sticks which you'd like to use, this adapter is exactly what you need.


New: Dreamcast controller to USB adapter and conversion circuit.
2013-11-02
Good news for Dreamcast controller appreciators! We now offer Dreamcast controller to USB adapters, making it possible to use your favorite controller on a PC. We also have conversion circuits for controller conversion, and mod projects.


Famicom controller to NES adapter
2013-09-24
This adapter enables the use of controllers meant for the Japanese Famicom on a NES.


PS/PS2 controller extension cables now available
2013-09-05
Game controller cables never seem to be long enough. Add an extra 1.8m (6 ft) with this Playstation controller extension cable.


GC and N64 connectors now available
2013-08-19
Now available: N64 and Gamecube controller connectors for mounting on a PCB. Perfect for adapter projects and console mods.


New: Four SNES controllers to USB circuit (with connectors)
2013-05-20
With this circuit, build you own four player SNES adapter. The board, already assembled and programmed, takes care of all the USB interfacing details so you can focus on the enclosure. For greater flexibiliy, the only components left to solder are the connectors (included).


NEW! NES controller to Gamecube/Wii adapter
2013-06-09
This adapter cable makes it possible to use NES compatible controllers on a Gamecube or a Wii with gamecube ports. Ideal for classic games.


Now available: Dual NES controller to USB circuit (with connectors)
2013-05-20
This is the board we use to build our anodized aluminium 2x NES to USB adapter. Now it is your turn to be creaative and come up with an amazing enclosure. The board, already assembled and programmed, takes care of all the USB interfacing details so you can focus on the enclosure.


New: Sega Dreamcast and Genesis/Megadrive extension cables
2013-05-19
Game controller cables never seem to be long enough. Add an extra 1.8m (6 ft) with those extension cables.


Components: SNES controller connectors now available
2013-03-30
SNES controller connector for mounting on a PCB. Perfect for adapter projects and mods.


New: 2 NES controllers to USB adapter
2013-03-05
Playing NES games with an emulator is great, and even better if the original gamepads are used. With this adapter, it possible to use a real NES controller on a computer using the USB bus.


Gamecube to Wiimote adapter
2013-02-25
Finally available! This adapter cable makes it possible to use a Gamecube controller on a Wii or Wii U by connecting to the wiimote as a classic controller. Ideal for Wii virtual console games on new systems without gamecube ports.


NEW! NES controller to Wiimote adapter
2013-02-23
This adapter cable makes it possible to use NES compatible controllers on a Wii or Wii U by connecting to the wiimote as a classic controller. Ideal for Wii virtual console NES games on new systems without gamecube ports.


Extenmote: NES/SNES/N64/Gamecube controller to Wiimote circuit
2013-02-09
A small circuit to connect a NES, SNES, N64 or Gamecube controller to a Wiimote. Can be installed inside a controller for a permanent conversion or used to build a custom adapter.


Wiimote extension cables now available
2013-01-26
Game controller cables never seem to be long enough. Add an extra 1m (6 ft) with this wiimote extension cable.


NES controller extension cables now available
2013-01-26
Game controller cables never seem to be long enough. Add an extra 1.8m (6 ft) with this Nintendo (NES) controller extension cable.


NEW! N64 controller to Wiimote adapter
2012-12-30
This adapter cable makes it possible to use N64 controllers on a Wii or Wii U by connecting to the wiimote as a classic controller. Ideal for Wii virtual console games on new systems without gamecube ports.


NEW! SNES controller to Wiimote adapter
2012-12-10
This adapter cable makes it possible to use SNES compatible controllers on a Wii or Wii U by connecting to the wiimote as a classic controller. Ideal for Wii virtual console SNES and NES games on new systems without gamecube ports.


New prices for our small USB conversion circuits
2012-12-10
All our small gamepad conversion circuits are now available at a lower price!
23.32$ CAD boards now only 18.99$ CAD!
19.99$ CAD boards now only 16.99$ CAD!


Wiimote connectors now available
2012-11-30
This connector is a drop-in replacement for the wiimote accessory connector. Ideal for repairs or for custom adapter projects.


Website translation to Japanese in progress
2012-11-28
In order to reach a broader market, we are happy to annouce that we are translating the website to Japanese. A lot of texts are still in English but they will be replaced as we complete the translation. This will be the third language we offer.


Introducing AnodeNES, a quality dual NES controller to USB adapter
2012-11-13
A high quality adapter, built in a beatiful metal enclosure, custom machined from a solid block of aluminium and anodized black. Supports two players using standard controllers or four if a NES FourScore is used.


Introducing a Wiimote accessory to USB adapter
2012-11-10
This adapter brings high quality modern Nintendo controllers to your PC. The Classic controller has plenty of buttons and axes making it an excellent option for a wide variety of games. And the much simpler Nunchuk, also supported by this adapter, allows one to play some games (eg: NES, SMS) single-handedly!


New circuit: Wiimote accessory to USB
2012-11-06
With this circuit, you can build an adapter for or convert a Nunchuk, Classic Controller or even the Wii motion plus to a standard USB HID joystick. The Nunchuk is great for playing simple games (eg: NES) with only one hand and the Classic controller for more advanced games.


New product: SNES controller to PSX adapter
2012-07-06
With this adapter, you can use SNES controllers (and compatible devices) on a PSX console. Ideal if you own special SNES controllers that you would like to use on your PSX or if you simply prefer SNES controllers.


New product: 16 Buttons USB joystick circuit board.
2012-06-17
An easy to use circuit board acting like a standard HID USB gamepad. Has 16 switch inputs (4 directions + 12 buttons). Ideal for custom joysticks and PC-based arcade cabinets.


New product: Gamecube controller to NES adapter
2012-02-11
With this adapter, using a Gamecube controller on a NES becomes possible. Perfect for a wireless solution involving the Nintendo Wavebird. And in an attempt to profit from the additional elements of the gamecube controller, the firmware has special features such as Turbo and mario-auto-run modes. It's fun!


Vibration support for all Gamecube/N64 to USB products
2012-01-03
Happy new year!
Our first update for 2012: All our N64, Gamecube and Gamecube/N64 to USB adapters and boards are now shipping with firmware version 2.1 which adds the highly requested Vibration/Rumble support!


New version of N64 to USB adapter supports the rumble pack!
2011-12-10
Now shipping with firmware version 2.1 which adds support for the N64 Rumble pack. Provides a gaming experience with an increased authenticity!


Gamecube controller to N64 adapter circuit
2011-08-16
With this circuit, build your own adapter to use a Gamecube controller on a N64. Provides a way to solve the worn-out N64 controllers, or the problem of cables (Wavebird supported!). The firmware, thanks to a programmable button mappings and a low latency algorithm insures a great gaming experience.


Sega saturn controller to USB adapter
2011-07-03
This adapter makes it possible to use Sega Saturn peripherals (controllers, mouse) on a PC or PS3 through an USB port. The current firmware supports: The basic controllers (ABCXYZ, L/R and Start buttons), the analogic controller and the mouse (aka 'Shuttlemouse'). Based on the conversion circuit annouced yesterday.


Sega saturn controller to USB circuit
2011-07-02
This circuit makes it possible to use Sega Saturn peripherals (controllers, mouse) on a PC or PS3 through an USB port. The current firmware supports: The basic controllers (ABCXYZ, L/R and Start buttons), the analogic controller and the mouse (aka 'Shuttlemouse')


Gamecube controller to N64 adapter
2011-06-25
With this adapter, use a Gamecube controller on a N64. A great solution to the worn-out N64 controllers, or to the problem of cables (Wavebird supported!). The firmware, thanks to a programmable button mappings and a low latency algorithm insures a great gaming experience.


Virtualboy controller to USB circuit
2011-04-23
This circuits makes it possible to convert a VirtualBoy controller to USB.


Intellivision to USB adapter
2011-03-19
With this adapter, you can use Intellivision 1 controllers on your PC through an USB port.


Four player SNES to USB adapter
2011-01-25
Now available: Four player SNES controller to USB adapter.