四方ボタンーと12個ボタンーをUSBと接続できる基板キット「USB-Game16」

Small circuit that acting like a standard HID USB gamepad. Has 16 switch inputs (4 directions + 12 buttons).

  •  The PCB
  • ma de câblage
  •  Example project
  •  Example project
  •  Example project
  •  Example project

商品説明

This circuit board has a total of 16 easy to wire inputs (4 directions and 12 buttons) and connects to an USB port, implementing a standard USB HID joystick.

Specifications:
  • 16 inputs: 4 Directional, 12 Buttons.
  • HID USB interface. Works as-is without installing special drivers on most platforms. (Linux, WinXP, Win7 32 and 64 bit).
  • On-board standard USB Type B connector. (cable not included)
  • Through-hole solder points for easy wire installation.
  • Widely spaced solder points helps prevent accidental bridging while soldering.
  • Dedicated GND signal for each button for easier wiring. No need to connect all common wires together.
  • Double layer PCB, 101.6mm X 54.86mm (4" x 2.160"). 4.5mm (0.177") diameter mounting holes.
  • On-boad activity LED
Potential applications:
  • Arcade style controller box, or integration in a PC-based arcade cabinet.
  • Simple joystick adapters (1 wire per button) to USB. Ex: neo-Geo, Atari...
  • With supporting software on the PC side, button inputs can serve other purposes than game control. The inputs can be connected to switches, limit-switch, alarm sensors. In any case, using a dedicated board such as this one is cleaner than modifying an off the shelf USB game controller.

注文

この商品は製造終了しました。

関連商品

商品の画像

Small circuit implementing a standard USB HID gamepad. Has 12 switch inputs (4 directions + 8 buttons)

売り切れ

キーワード