Button mappings

For product:

Classic controller to Gamecube/Wii adapter

An adapter to use Classic controllers on a Gamecube or Wii.

$24.99

For firmware(s):

Instructions:

To enable a mapping, press the corresponding button at the right moment. The right moment being one of:

Within about 1 second after powering up the adapter (i.e. Turning the console ON or connecting the cable to the console)
Within about 1 second after connecting the Classic controller

The adapter saves and restores the last mapping automatically. (i.e. If you are always playing the same game, no need to re-enable the mapping every time you use the adapter)

Please also note:

The adapter performs auto-calibration at power up. Do not touch the Classic controller joysticks when connecting it to a live adapter or when turning the console on.
Mappings can be changed during the whole second following power-up or Classic controller connection. Wait 2 seconds before touching the buttons to avoid an unintentional mapping change.

'One-one' mapping

'One-one' mapping
Gamecube	Classic controller	Comments
DPAD	DPAD
Main stick	Left stick
C-Stick	Right stick
A	A	One-one mapping
B	B
X	X
Y	Y
START	START (+)
Z	SELECT (-)
Z	Zl
Z	Zr
L	L	Analog functionality retained.
R	R	Analog functionality retained.
CStick-left	L + R + SELECT(-) + DPAD-Left	Snes9x GX menu
CStick-right	L + R + SELECT(-) + DPAD-Right	Snes9x GX fast forward
Selection:	Enable it by holding the B on your Classic controller when powering the adapter.
Uses:	Gamecube games Virtual console SNES games with a Classic controller Virtual console SNES games with an SNES Classic edition controller Virtual console NES games using a NES Classic edition controller.

'Z as triggers' mapping

'Z as triggers' mapping
Gamecube	Classic controller	Comments
DPAD	DPAD
Main stick	Left stick
C-Stick	Right stick
A	A	One-one mapping
B	B
X	X
Y	Y
START	START (+)
Z	SELECT (-)
Z	L	Gamecube Z button triggered by Classic controller trigger buttons)
Z	R
L	Zl	Analog functionality emulated (Zr/Zl buttons are digital only).
R	Zr
Selection:	Enable it by holding the Zl on your Classic controller when powering the adapter.
Uses:	Gamecube games, Virtual console SNES games.
Notes:	On a Classic Controller Pro, this mapping exchanges the role of the L/R and Zl/Zr buttons to restore the Gamecube feel regarding the relative position of the Z and L/R triggers. (i.e. On a gamecube controller, the L/R triggers are large and located below the narrow Z button, but on the Classic Controller Pro, the L/R triggers are narrow and placed above the large Zr/Zl buttons.

'NES mode' mapping

'NES mode' mapping
Gamecube	Classic controller	Comments
DPAD	DPAD
Main stick	Left stick
C-Stick	Right stick
A	B	For NES virtual console games. Run=Y, Jump=B
B	Y	For NES virtual console games. Run=Y, Jump=B
X	X	No effect in virtual console.
Y	A
START	START (+)
Z	SELECT (-)
Z	Zl
Z	Zr
L	L	Analog functionality retained.
R	R	Analog functionality retained.
Selection:	Enable it by holding the *START(+)* on your Classic controller when powering the adapter.
Uses:	Virtual console NES games with a Classic controller Virtual console NES games with an SNES Classic edition controller.

'Game Boy Player' mapping

'Game Boy Player' mapping
Gamecube	Classic controller	Comments
DPAD	DPAD
Main stick	Left stick
C-Stick	Right stick
A	B	GBA A
B	Y	GBA B
START	START (+)	GBA START
Y	SELECT (-)	GBA SELECT
L	Zl / L	GBA L
R	Zr / R	GBA R
Z	HOME	Game Boy Player menu
Z	A + X	Game Boy Player menu (combo for SNES Classic edition controllers without a home button)
L	L	Analog functionality retained.
R	R	Analog functionality retained.
Selection:	Enable it by holding the X on your Classic controller when powering the adapter.
Uses:	Game Boy Player games with a Classic controller or SNES Classic edition controller.
Notes:	Classic controller Y/B mapped to B/A for comfort. For NES Classic edition controller, use the 'AB-style' mapping instead.

'Game Boy Player AB-style' mapping

'Game Boy Player AB-style' mapping
Gamecube	Classic controller	Comments
DPAD	DPAD
Main stick	Left stick
C-Stick	Right stick
A	A	GBA A
B	B	GBA B
START	START (+)	GBA START
Y	SELECT (-)	GBA SELECT
L	Zl / L	GBA L
R	Zr / R	GBA R
Z	HOME	Game Boy Player menu
Z	Y + X	Game Boy Player menu (combo for SNES Classic edition controllers without a home button)
Z	A + B + START + SELECT + DPAD_RIGHT	Game Boy Player menu (combo for NES Classic edition controllers without a home button)
L	L	Analog functionality retained.
R	R	Analog functionality retained.
Selection:	Enable it by holding the A on your Classic controller when powering the adapter.
Uses:	Game Boy Player games with a Classic controller or NES Classic edition controller

'Megaman anniversary collection' mapping

'Megaman anniversary collection' mapping
Gamecube	Classic controller	Comments
DPAD	DPAD
Main stick	Left stick
C-Stick	Right stick
A	Y	Megaman fire
B	B	Megaman jump
X	A	Megaman slide
Y	X
START	START (+)
Z	SELECT (-)
L	L	Analog functionality retained.
R	R	Analog functionality retained.
Selection:	Enable it by holding the Y on your Classic controller when powering the adapter.
Uses:	Megaman anniversary collection with an SNES-style controller

'Tony Hawk' mapping

'Tony Hawk' mapping
Gamecube	Classic controller	Comments
DPAD	DPAD
Main stick	Left stick
C-Stick	Right stick
A	X
B	A
X	Y
Y	B
START	START (+)
Z	SELECT (-)
L	L	Analog functionality retained.
R	R	Analog functionality retained.
Selection:	Enable it by holding the *SELECT/MINUS(-)* on your Classic controller when powering the adapter.
Uses:	For Tony Hawk games. Added in firmware v1.6